The OR-T250 has been replaced by the OR-T260 (click to link)

Orgapack's Battery Operated Tool for Poly Strapping

The Orgapack OR-T 250 is now the most user friendly tool for plastic strapping that runs automatically, semi-automatically, manually or in soft corner mode, making it the most versatile tool for poly strapping.The 250 model suits poly strapping size 1/2" - 5/8" poly strap. Thanks to recent improvements from Orgapack, the new tools no longer have any flaws and the motor and boards seem to be holding up well. Using a 14.4 volt Li-Ion Bosch battery, the OR-T 250 can complete up to 400 packages per charge. This tool has a fully adjustable tensioning force of up to 560 pounds, and also has an adjustable strap width option. Orgapack's OR-T 250 seals automatically or with the touch of a button using a friction weld seal.

This tool includes 2 batteries (14.4 volt) and rapid charger.

Versatility

> The tools that require metal seals to secure the joint are a more expensive investment in the long run due to the price of regularly stocking metal seals. However, that additional cost is eliminated using the Orgapack ORT-250 because it applies a sealless joint using friction weld sealing technology.

>The sealless and metal seals both hold the same joint efficiency, so there is no giving up seal security with this tool.

> Another guarantee with the sealless tool is that the friction-weld seal will never rust or get broken down during transportation or storage. Poly strapping can withstand humid or damp conditions making it a better option over steel strapping and metal seals.

> As opposed to manual tools that require a few steps to tension, seal and cut the strap, this OR-T 250 tool takes only 3 seconds to complete the entire sealing process, with a lot less effort than before.

> To ensure accurate and precise tensioning, the digital display panel distinctly shows the set tensioning level with the option to change it depending on the application. 

> Another model, the Orgapack OR-T 400 is the larger version of the 250 and uses 5/8" - 3/4" poly strapping.If you like the battery sealing technology of this Orgapack tool, but don't need the full combination action, try the OR-T 50 for small or light loads. 

> It is a manual tensioner but a battery sealer all in one tool. It works with much smaller strap, up to 3/4." 

> Signode has a replica OR-T 250 tool, the BXT2-16 tool.

Tool Repair

All wear parts and other parts for the OR-T 250 can be ordered below in the "Order Parts" tab! Common OR-T 250 wear parts include:

1821.047.013 Tension Wheel 

1821.048.015 Tooth Plate 

1821.209.019 Knife 

2187.001 Battery, 14V/2.6 AH Li-Ion

2187.002 Battery, 14V/2.6 AH Li-Ion, US

Need your Tool Repaired? Send it to our tool repair department for a quick turnaround. 

Specifications

>  Tool length: 13.1” (334 mm) 

>  Tool width: 5.4” (138 mm) 

>  Tool height: 5.8” (148 mm) 

>  Tool weight (including battery): 8.5 pounds (3.9 kg)

>  Tensioning force: Fully adjustable up to 560 pounds

>  Tensioning speed: 8.6 inches/second

>  Battery Charging Time: Approx. min. 15-30 minutes

>  The OR-T 250 Includes 2 Lithium batteries (14.4 volt) and 1 charger.

Allstrap Opinion

The great thing about the Orgapack OR-T 250 tool is everything is done with just the touch of one button in auto mode. Feeding the strap in is easier than other brands of battery banding tools because the jaws open wider. Let the lever go, and hit the go button with your thumb. Step back, in about 3 seconds the tool will accomplish the work that used to take 30 seconds and lots of cranking to accomplish. It pulls up to 560 pounds of tension, or set for "Soft" and the weld will start when the corner of the box just starts to pull in. The OR-T 250 is a great tool. It is very easy to use, well balanced, and tough.